|
|
|
|
|
 |
NL Series (NL150)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Features |
| 0.38 Inch Profile |
| Remote Turn On (TTL) |
| Output Voltage Trim Pin |
| Over Temperature Protection |
| MIL-STD-883 Screening (Military Version) |
| Output Overvoltage/Overcurrent Protection |
| How To Order | |
| Series: | NL |
| Total Output Power: | 150 Watts |
| Output: | "S" for Single, "T" for Triple |
| Product Grade: | "M" for Military "I" for Industrial |
| Output Voltage: | 2/3.3/5/5.2/12/15 |
| Options: | A/B/C/D/I |
|
|
|
| Options | |
| A Option: | Pins out side of unit. |
| B Option: | Pins out bottom of unit. |
| C Option: | Pins out top of unit. |
| D Option: | Through hole inserts (STD threaded) .0115 DIA thu holes. |
| I Option: | M2.5 inserts. |
|
|
|
| Accessory Products | |
| NLF150: | EMI Filter to meet MIL-STD-461D Compliance CE101 & CE102. |
| Selection Chart | ||
| Nominal Output (Vdc) | Single Output Current (Amps) | Triple Per Channel Current (Amps) |
|---|---|---|
| 2.0 | 30 | 10 |
| 3.3 | 30 | 10 |
| 5.0 | 30 | 10 |
| 5.2 | 28.8 | 9.6 |
| 12 | 12.6 | 4.2 |
| 15 | 10 | 3.3 |
| Input Characteristics | ||||
| Min | Typ | Max | Units | |
|---|---|---|---|---|
| Input Voltage | 9 | 12 | 18 | Vdc |
| Brown Out (75%) Full Load | 7 | Vdc | ||
| No Load Power Dissipation | 1 | 2 | Watt | |
| Inrush Charge | 3.5 | mc | ||
| Reflected Ripple Current | 3 | % | ||
| Logic Disable Current (Sink) | 100 | 150 | µA | |
| Logic Disable Power In | 0.5 | 1 | W | |
| Input Ripple Rejection (120 Hz) | 50 | dB | ||
| Input Ripple Rejection (800 Hz) | 40 | dB | ||
| Efficiency | 72 | 78-85 | % | |
| Efficiency (3.3Vdc) | 70 | 75 | % | |
| Efficiency (2Vdc) | 63 | 69 | % | |
| EMI | Units conform to MIL-STD-461D (on the input leads) with companion filter |
| Input Transient | Units can withstand 24V transients for up to 0.1 second |
| Output Characteristics | ||||
| Min | Typ | Max | Units | |
|---|---|---|---|---|
| Set Point Accuracy | 1* | % Vout | ||
| Load Regulation | 10 | 30 | mV | |
| Line Regulation | 5 | 25 | mV | |
| Ripple P-P (10 MHz) | 50 | 150 | mV | |
| Trim Range | 100 | 110 | % Vout | |
| Remote Sense Compensation | 0.5 | Vdc | ||
| Overvoltage Protection(2V, 3.3V) | 140 | % Vout | ||
| Overvoltage Protection(5V to 15V) | 130 | % Vout | ||
| Current Sharing | +/- 10 | % Iout | ||
| Transient Response (% Vout 1%) Time / Overshoot | ||||
| 20 - 80% Load | 300 / 250 | µS/mV | ||
| Low Line - High Line | 250 / 200 | µS/mV | ||
| 50 - 100% Load | 250 / 200 | µS/mV | ||
| Temperature Drift | 0.01 | 0.05 | %/oC | |
| Long Term Drift | 0.01 | 0.02 | %/1KHrs | |
| Current Limit | 105 | 125 | 150 | % Iout |
| Short Circuit Current | 20 | 75 | % Iout | |
| Turn On Time | 3 | mS | ||
| Logic Turn On Time | 3 | mS | ||
| * 1% or 50mV, whichever is greater | ||||
| Isolation Characteristics | ||||
| Min | Typ | Max | Units | |
|---|---|---|---|---|
| Isolation: Input to Output |
250 | Vdc | ||
| Output to Base | 100 | Vdc | ||
| Input to Base | 100 | Vdc | ||
| Input to Output
Capacitance |
0.066 | µF | ||
| Insulation Resistance
(@50 Vdc) |
50 | MOhm | ||
| Mechanical Characteristics | ||
| Weight | 9.6 | oz |
| 270 | grams | |
| Size | 3.0 x 4.5 x 0.38 | inch |
| 76.2 x 114.3 x 9.7 | mm | |
| Volume | 5.13 | inch3 |
| 84 | cm3 | |
| Temperature Characteristics | ||||
| Min | Typ | Max | Units | |
|---|---|---|---|---|
| Operating | -55 | -100 | oC | |
| Storage (Ambient) | -55 | +125 | oC | |
| Over Temperature Shutdown | +105 | oC | ||
| Thermal Resistance Case - Ambient | 9 | oC/W | ||
| Environmental Screening - M Model | |
| Stabilization Bake: | +125oC for 24 hours similar to Mil-Std-883, M1108, Condition B |
| Temperature Cycling: | 10 cycles at -55oC to +125oC (transition period 36 minutes) similar to Mil-Std-883, M1010, Condition B |
| Burn-in: | 160 hours at +85oC minimum |
| Final Testing | |
| Environmental Screening - I Model | |
| Burn-in: | 16 hours at +85oC minimum |
| Final Testing
|
|
